SmartDVB 0.2.5 Final

من طرف **casez** 1/1/2013, 21:33

Home Page
: من هنـــــــــــــــــــــــــــــــا

Info
: من هنـــــــــــــــــــــــــــــــا

Here it finally is, this was totally delayed due to uncessary stuff, but
well if i am to die of stress coz of these people at least i made
something others around the world might appreciate.

Mainly just fixes since the rc1 which was already reasonable so let's
hope nothing introduced pops up, hope not as this had been the longest
test run so far with SmartDVB, again my own decision but well.

Some things are unfinished as of yet but i decided to go ahead with the
release anyways as some testing was taking too long (band-stacked
dbs/fss lnb's should work better but not totally verified yet, and there
are also
changes for atsc clear-qam modulation processing but this is untested
yet (only for bda.dev standard tuning), or well one tester on xp could
not get it to run but hoping this might be specific card related, would
like to know if this works on win7 at least so if anyone able to test
clear-qam uses this in the near future and is willing to test please let
me know)..

What's

In this version:

Changed: small change to show signal also when not able to decode a channel.
Fixed: starting udp streaming from the new tools menu option wasn't
working correctly, also the menu checkbox was not always updated
correctly.
Changed: TS recording is now default on new installations (as mpeg does not yet work correctly for ac3).
Changed: some changes to shutdown code as some were having problems
there it seems, untested yet as for me it worked without hickups before
already.
Changed: mousewheel/middle mouse button now switches between floating and main when set in settings.
Fixed: latitude for newly added satellite was wrongly set to DVB-S
instead of the degree value due to recent changes (and me not testing
adding new sats ofcourse).
Fixed: small fix when exiting app with recording on and cancelling the exit the video would become unstable.
Fixed: some fixes to the scheduling functionality. There was a crash
when adding a schedule action from the epg's.Also now the now event
scheduling will try to change the starting time so the event actually
runs (before it wouldn't as the start time was in the past and the ms
scheduler in such case ignores such an event.)
Fixed: blindscanner would sometimes not pick up frequencies correctly at
the end of the frequency range.min/max sr processing was not working
correctly in blindscanner.Also some fix to try to also blindscan
correctly at the end of a range (sometimes a last valid frequency was
missed it seems).
Fixed: some fixes to no signal processing in scanner, let me know if you still encounter problems here.
Fixed: gotosat functionality in add frequencies dialog in my case was not always operational, hopefully fixed.
Updated: blindscanner strings moved to resources to make translations
possible (and other recently added strings, let me know if you're still
missing something during translations).
Fixed: Some fixes to the sync dialog. Some fecs were being wrongly
imported in the sync dialog (91 to smart should be 910) and modulation
changes are now also reflected in color changes.
Fixed: Numeric keypad should now work again on keyboard input selection (hard to find little bug).
Fixed: more udp fixes as in some cases buffer overruns could be wrongly generated due to misconfiguration.
Changed: setup filter.ini updated to reflect current codec use better (LAV/MS DTV etc).
Changed: updated crazycat streamreader.dll installed to latest one.
Fixed: some more fixes to no-signal processing.
Fixed: some fixes to switch handling in blindscanner (thanks to moonchild once again for testing this).
Updated: transponder lists updated (sats only).
Updated: small changes to old bdas.dev stream processing (analog to my
recent changes in bda.dev) should make this also more stable with
stream, but still use bda.dev for now (in future i might revise and
update bdas.dev as this module probably will work better for things like
multiple devices, more modular built).Also the smartdump.ax filter used
by this was not correctly rebuilt before (still used some older
directshow sdk, so maybe this was the reason bdas.dev didn't work that
well for some).
Fixed: handling of bandstacked lnb's (dbs/fss) as polarization was not always set correctly here (untested).
Fixed: small fix which might affect application stability when tuning lots of no-signal or bad signal channels in one go.
Fixed: small fix in channel processing which could result in some wrongly lost channels.
Fixed: various small fixes in install process (in some cases if things
didn't go the default way let's say smart needed to be restarted for the
video to work correctly (eg. when failing to start the initial device
and needing to select another one).
Fixed: some changes to bandstacked dishpro handling which were not working correctly (untested yet).
Fixed: some little timing changes to bda.dev (for better stability hopefully).
Fixed: atsc was broken due to recent clear-qam support changes (clear-qam still untested, atsc should work again).
Fixed: more changes to band-stacked lnb handling in bda.dev and blindscan.dev.
Fixed: some changes after rebuild long recordings failed after some
hours in the taskbar, oddly enough i'm sure this didn't happen before
the new system rebuild with the same compiler (so there are subtle
differences even if the same settings, i'll have to test this some more
i'm afraid).
Fixed: some changes to bda.dev concerning clear-qam (atsc digital cable)
handling as this wasn't working yet (tuning space addition/changes,
untested).
Fixed: some more bugfixes and fixes to blindscan.dev among others again concerning band-stacked lnb's.
Fixed: bug in bda.dev which would show zero level in some situations while there actually was level detected.
Fixed: still video filter wasn't working with audio channels.Seems to work again, not tested much.
Added: alternative signal detection to bda.dev (under device settings).
Fixed: some showing problems when moving from floating to main
etc under certain conditions the main would be hidden instead of
shown.
Fixed: usals changes were not enabling apply button.
Changed: updated american transponder list files (thanks to ger).

Installing SmartDVB:

1. Double-click the SmartDVB installer icon.
2. Follow the onscreen instructions.

System requirements:

The following hardware and software is required to run SmartDVB.

* An Intel Pentium processor or equivalent, 800 MHz or faster
* Windows XP, Windows Vista
* At least 128 MB of available random-access memory (RAM) (512 MB recommended)
* At least 500 MB available disk space
* A16-bit (thousands of colors) monitor capable of 1024 x 768 pixel resolution or better (millions of colors recommended)